Graco Laura Ashley Stroller Instructions

Grab the handle and pull it toward you to open the stroller. Continue pulling until you hear the handle snap into place. Make sure the stroller is locked into place by pushing the handle away from you. If it doesn't move, the stroller is locked.

Open the child's tray by pressing the button below the left side and push the tray upward.

Secure the child using the belts on the stroller. Insert the top left belt into the left side belt latch and the top right belt into the right side belt latch. Insert both belts into the bottom middle belt latch until you hear a click.

Convert the belt to a three-point harness by removing the top belts from the side belt latches and inserting both side belts into the middle bottom belt latch until you hear a click.

Engage the stroller's brakes by pushing the tabs behind the back wheels upward with your foot. Push the stroller forward to make sure the brakes are locked. To unlock the brakes, push the tabs down with your foot.

Lock the front wheels by pushing the tab in front of the wheels upward with your finger. Push the tab down with your finger to unlock the wheels.

Adjust the seat for reclining by lifting the back of the canopy and squeezing the recline wire on the back of the seat. Push the seat back to the desired position.

Place the seat in a flat recline position to use the pop-up enclosure. Lift the pop-up enclosure by releasing the Velcro straps behind the leg rest. Pull the straps though the two slots on the sides. Lift the child's tray, raise the pop-up enclosure and push the straps through the two button holes on the sides of the seat cover. Fasten the Velcro straps together. Push the child's tray down and attach the plastic hooks on the pop-up enclosure to secure the tray.

Place the head support on the stroller by pushing it into the top snaps on the seat for older children or the bottom snaps for younger children.

Lower the basket by pulling the basket wire out.

Fold the stroller by unhooking the pop-up enclosure and refastening the straps to the underside of the stroller. Push the button on the handle and push the stroller toward the floor. Pull the storage latch upward to secure it.

Attach the infant carrier by adjusting the stroller into the lower position. Place the mounting notches over the tray. Push the infant carrier down into the stroller until you hear a snapping sound. Push the stroller canopy forward to find the restraint latch on the sides of the stroller. Push the stroller canopy back and rotate the restraint latches until they snap the infant carrier into place. Pull the infant carrier up to make sure it's secure.

Unlock the restraint latches by pushing the button under the restraint latch and rotate it away from infant carrier. Remove the infant carrier by pressing the release handle on the back of the infant carrier and lift it up.