How to Fold a Safety 1st Baby Walker

Some Safety 1st Baby Walkers have the ability to fold down for easy transport and storage. Each model will vary slightly regarding the location of the locking buttons and tabs. However, the procedure for folding the walker will be the same for every folding model of baby walker manufactured by Safety 1st.

Instructions

    • 1

      Press the two locking buttons in at the same time. The locking buttons are located below the seat on the rear leg post.

    • 2

      Lift the top of the walker slightly up so that the locking tabs disappear into the rear leg post.

    • 3

      Pull out the locking tabs located in front of the locking buttons. The locking tabs are small metal clips.

    • 4

      Push down on the top of the walker to fold it onto the base.

    2. Previous:

    Next:

    • Proper Infant Car Seat Installation
      Infant car seats have helped to make it safer for babies who are riding in a vehicle. Although a car seat does not guarantee a child will survive a car crash, it increases the favorable odds. If a car seat is improperly installed, then the seat is a
    • Safety At Home in Baby's First Year
          Too many children die every year from preventable injuries in British Columbia. Many of these happen at home - but you can reduce the risk by following these tips. Keep your home safe Fasten carpet on stairs and remove loose rugs t
    • Are Ventless Gas Heaters Safe for a Baby?
      Ventless gas heaters, which may release carbon monoxide, are likely not safe to use around babies. Exposure to carbon monoxide can cause headaches, disorientation and other ailments and even death. There are indications of a possible link between car