How to Assemble a Graco Infant Car Seat
Just because your baby is in a car seat doesn't guarantee she is safe. You need to be sure you have properly assembled the Graco infant seat before trusting your baby's life to it.
Graco SnugRide infant seats were chosen as a top pick by the ConsumerSearch website. Reviews raved about the simple installation, variety of colors and patterns and crash test ratings. Once you assemble and install your Graco infant seat, you may very well agree.
Instructions
Handle and Canopy
Press the buttons on each side of the handle to adjust. The handle will click to lock into position. Most Graco infant seat handles can be adjusted to five different settings, depending on whether you are carrying, traveling with or storing your infant seat. Thread a canopy support completely into one side of the Graco infant seat canopy. Slide the straight end of the second support into the first canopy support. Repeat Steps 2 and 3 for Graco infant seat models with four supports instead of two. Attach one semi-circle end of the canopy support to the infant seat between the restraint and handle base. Repeat for the other side. Head Support
Unsnap the sides of a head support with snaps. Thread the harness strap through the Graco infant head support slots and resnap. Adjust the head support for your infant's comfort. Thread the Graco infant seat harness through the slots of the head support without snaps. Adjust the head support for your infant's comfort. Seat Pad
Lay the Graco infant seat pad in the car seat. Wrap the bottom portion of the pad around and under the foot end of the car seat. Stretch the pad and wrap the top portion around the head section of the car seat. Wrap the attached elastic straps around the car seat handle. Skip this step if your car seat model does not have side straps. Fasten the strap to the hook attached to the car seat pad. Repeat for the other side if your model has side straps.