How to Install a Baby Gate on a Banister

How to Install a Baby Gate on a Banister. Finding and installing a baby gate on a staircase with a banister can be a challenge. Banisters usually do not provide a flat surface to mount a gate, and it's difficult to install a gate without putting holes in the banister. You should choose a gate specifically made to work on banisters. Some models require you to purchase a separate mounting kit to install them.

Instructions

    • 1

      Search online or in a local stores for the right baby gate. (Some Web sites that specialize in gates are listed below in the resource section.) Baby gates come in a wide range of materials, including stained wood gates to better fit in with the decor of your home. A few popular manufacturers of baby safety gates are Evenflo, KidCo, Safety 1st and Graco.

    • 2

      Measure the height and width of the opening where the gate will be installed. Safety gates have specific dimensions that they will fit, so be sure to order the right one. Extension kits are available to fit larger areas.

    • 3

      Determine if you need a wall mounting kit. Since many banisters are cylindrical or turned, you'll probably need a kit to provide a straight, flat surface for mounting the gate. These are available at most stores Web sites that sell baby gates. The kits incorporate clamps, hardware and vertical mounting wood to add a mounting surface for the gate. Some even attach to very narrow banisters and spindles. If the opposite side of the gate is going to be attached to a hollow wall (a plaster or drywall wall with no stud behind it) you'll need a mounting kit for that side, too.

    • 4

      Create a mount yourself by attaching a piece of lumber to the banister as an alternative to using a wall mounting kit. Use a piece of 1x4 or wider board. Attach it to the banister with clamps, ties, straps or screws. Make sure the mount is secure enough to handle the weight of a child pushing on it, and operates in a stable manner.

    • 5

      Try out the gate before permanently installing it. Make sure you are comfortable with the way it opens and closes.

    • 6

      Install the mounting hardware and the gate according to manufacturer's directions.

    2. Previous:

    Next:

    • Vicks' Baby Rub Safety for Infants
      Vicks VapoRub has been a mothers answer to a stuffy nose since 1905. This green-colored, strong-smelling cream is rubbed gently on to the chest of the cold sufferer and supposedly clears up his nasal passageway so that he can breath. If the sick pers
    • Car safety for babies
      To be as safe as possible when travelling in cars, children and adults need to be using restraints or seatbelts that are properly fitted and suited to the age and size of the person. There are rules in each Australian state
    • Safety Measures for Children Just Learning How to Walk at Home
      As much as parents often anticipate their childs milestones with eager anticipation, it can also be a little nerve wracking when your child becomes mobile. Keeping your toddler or baby safe when he begins to walk is a big priority, but you can get yo